How To Change Oil On BMW R1200RT?

Regular oil changes are crucial for maintaining the optimal performance and longevity of your BMW R1200RT motorcycle.

Learn about the electronic oil level sensor, the warning signs of low oil pressure, and step-by-step instructions for checking and topping up oil.

Low Oil Level Warnings

BMW R1200RT is equipped with a sophisticated oil-level monitoring system.

If the engine oil pressure is insufficient, a general warning light will flash red, and an oil-can symbol will appear on the display.

It’s crucial to recognize these signs to prevent potential engine damage.

Electronic Oil Level Sensor Function

The electronic oil level sensor is a key component in detecting low engine oil levels.

If the oil level is too low, the sensor triggers the appearance of an oil level symbol on the display, indicating the need for immediate attention.

Steps for Checking and Topping Up Oil

The oil level indicator provides information when the motorcycle is stopped.

Ensure that the engine is at operating temperature, idling for at least 30 seconds, the side-stand is retracted, and the motorcycle is vertical.

Proper Procedure for Checking Engine Oil Level

Switch off the engine at operating temperature.

Place the motorcycle on the center stand on a level and firm surface.

Wait five minutes to allow the oil to collect in the oil pan.

Read off the oil level from the display.

Maintaining Correct Engine Oil Levels

If the oil level is below the MIN mark, proceed to top up the engine oil.

If the oil level is above the MAX mark, consult a specialized workshop for correction.

Ensuring Accuracy in Oil Level Readings

The oil level varies with temperature, and checking it with a cold engine or after a short trip can lead to misinterpretations.

To ensure accuracy, only check the oil level after a longer trip.

When to check engine oil?

  • With the engine at operating temperature.
  • After placing the motorcycle on the center stand.
  • When the motorcycle is vertical.

Steps for Correctly Checking Oil Level

  1. Switch off the engine at operating temperature.
  2. Ensure the motorcycle is on a level and firm surface, placed on the center stand.
  3. Wait five minutes to allow oil to collect in the oil pan.
  4. Read off the oil level from the display.
How to change oil on BMW R1200RT

Guidelines for Topping Up Engine Oil

Before topping up engine oil, ensure:

  • The ground is level and firm.
  • The motorcycle is parked securely.

Step-by-Step Topping Up Process

  1. Wipe the area around the fill location clean.
  2. Remove the cap of the engine oil fill location using the toolkit provided.
  3. Add engine oil up to the specified level.
  4. Check the engine oil level again to ensure it falls within the recommended range.

Both too little and too much engine oil can lead to engine damage. Refill the oil according to manufacturer guidelines.

Oil Change Process

After topping up the engine oil, double-check the oil level following the same procedure mentioned earlier.

If the oil level is above the MAX mark, consult a specialized workshop to correct the excess oil level.

Install the cap of the engine oil fill location securely using the toolkit. A properly sealed fill location prevents oil leaks and ensures the engine’s reliability.

Troubleshooting Common Issues

Mentioned below are some common problems encountered during an oil change on the BMW R1200RT.

Electronic Oil Level Sensor Malfunction

  • Issue: The oil level symbol appears on the display, suggesting a low oil level detected by the electronic oil level sensor.
  • Possible Causes: Actual low oil level or a defective sensor.
  • Solution: Follow the oil level check procedure and top up the oil if needed. If the display shows “Check oil level” despite a correct reading, the sensor may be faulty. Contact a specialized workshop for assistance.

Challenges with Oil Level Indicator

  • Issue: Despite a correct oil level on the sight glass, the display shows “Check oil level,” indicating a potential problem with the oil level indicator.
  • Possible Causes: Sensor defects or conditions not met for accurate measurements.
  • Solution: If the indicator persists in showing incorrect information, especially with a correct sight glass reading, consult your authorized BMW Motorrad retailer. They can diagnose and address issues with the oil level indicator.

Temperature-Related Misinterpretations

  • Issue: Checking the oil level with a cold engine or after a short trip can lead to incorrect oil fill quantities.
  • Solution: To ensure accurate readings, only check the oil level after a longer trip when the engine is at operating temperature. Follow the specified procedure for the most reliable results.

Overfilling or Underfilling Oil

  • Issue: Both too little and too much engine oil can lead to engine damage.
  • Solution: Always adhere to specified oil levels, and if adjustments are needed, follow the correct topping-up procedure.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top