Honda ST1300 Tire Size, Tire Pressure, Wheel & Rim Size

The front tire size on the ST1300 is 120/70R17 and the size of the rear tire is 170/60R17. A tire pressure of 36 psi (250 kPa) for the front tire and 42 psi (290 kPa) for the rear is recommended.

Honda ST1300 Tire Size

Replace ST1300’s tires with the same OEM spec to ensure optimal handling and prevent clearance issues.

Honda ST1300 Front Tire Size

The Honda ST1300 comes equipped with a 120/70R17 front tire from the factory.

This tire size indicates a 120mm wide tire with a 70% aspect ratio and a 17-inch wheel rim diameter.

Honda recommends replacing the front tire with the same OEM spec 120/70R17 size to maintain proper handling and avoid clearance issues.

Honda ST1300 Rear Tire Size

The rear tire on the Honda ST1300 is a 170/60R17. This means it has a width of 170mm, an aspect ratio of 60%, and fits a 17-inch wheel rim.

Honda advises sticking with the OEM 170/60R17 size when replacing the rear tire rather than deviating from stock.

Some riders choose to install a slightly wider 180/55R17 rear tire for added traction and stability at higher speeds.

However, this may negatively impact handling. Overall, the factory 170/60R17 is the ideal size for balanced ride characteristics.

Read the following article for more info on ST1300 Specifications.

Honda ST1300 Tire Pressure

Honda specifies a tire pressure of 36 psi (250 kPa) for the front tire and 42 psi (290 kPa) for the rear.

Maintaining proper inflation pressure is critical for motorcycle tires to maximize grip, stability, tread life, and fuel efficiency.

These pressures should be checked when tires are cold prior to riding.

Some riders experiment with slightly lower pressures for a smoother ride, while higher pressures promote quicker steering response.

Overall, sticking close to Honda’s recommended tire pressures will provide an optimal blend of handling, braking, and comfort.

Honda st1300 tire specifications

Honda ST1300 Tire Suggestions

In addition to the OEM-sized Dunlop D220F and Michelin Pilot Road 3, several other tire models are popular choices for replacing the stock rubber on the Honda ST1300:

  • Bridgestone Battlax BT023: Sport-touring focused tire praised for sporty grip and handling.
  • Pirelli Angel GT: Provides long wear life with reliable wet and dry traction.
  • Metzeler Roadtec 01: Impressive high-speed stability and grip in varied conditions.

2004 Honda ST1300 Tire Specs

The 2004 Honda ST1300 used the same tire sizes and pressures as current models:

  • Front tire 120/70R17
  • Rear tire 170/60R17
  • Front pressure 36 psi
  • Rear pressure 42 psi

So modern replacement tires in these sizes can be installed on 2004 models while maintaining OEM specs.

Honda ST1300 Wheel and Rim Size

All Honda ST1300 models feature 17-inch wheels front and rear.

The front uses a 3.50-inch wide rim while the rear rim width is 5.50 inches.

These 17-inch alloy rims are the proper wheels for matching the factory 120/70R17 and 170/60R17 tires.

Maintenance Tips for Tires

To maximize motorcycle tire life and safety:

  • Check pressures monthly and before long rides.
  • Inspect tread depth regularly and replace at 2/32 inches.
  • Ensure tires are properly balanced.
  • Avoid curbs or potholes which can damage wheels/tires.
  • Check wheel bearings and seals during service.
  • Consider tire rotation at 5K-8K miles for even wear.
  • Check date codes – don’t use tires over 5 years old.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top